Door closer GEZE TS 2000 V BC with standard link arm - ARRANGEMENT 1

Door closer GEZE TS 2000 V BC with standard link arm
ARRANGEMENT 1

Manufacturer - GEZE (Germany)

• top-mounted door closer body with standard link arm
• integrated back check that cannot be deactivated
• suitable for interior and exterior doors with single leaf
• door leaf width up to 1250 mm
  
• installed door pull side - closer body screwed onto leaf
• suitable for both left and right hand doors opening either inwards or outwards
• all functions can be set from front
• adjustable closing speed
• integrated back check slows the closer down in a set angle - it becomes more difficult to open in order to prevent the door from swinging open at too wide an angle
• back check activates at ~80° opening angle, the angle is not adjustable
• hydraulic latching action, adjustable via valve
• closing force can be adjusted by installing the closer profile at a closer or further distance from the hinge axle, fitting to sizes 2/4/5 according to EN 1154:
  • size '2' - for leaf width up to 850 mm
  • size '4' - for leaf width up to 1100 mm
  • size '5' - for leaf width up to 1250 mm
• latching action adjustable via link arm
• max opening angle: 180º
• not certified for use in fire and smoke safety doors
• closer body size: 226 x 48 x 60 mm 
• colour: black RAL9005

• Closer body mounting plate, galvanised
  Closer can be secured on the surface in more places other than the 3 screws on the closer's body.
  Product code: SB00004586

---

Documents

Adjusting GEZE door closer

Mounting plate for door closer TS 2000 V/TS 2000 V BC

Installation diagram for door closer TS 2000 V

Assembly instructions for GEZE TS 2000 V / 2000 V BC