LOGGIAWOOD sliding panel with fixed wooden slats

LOGGIAWOOD shutter panels with fixed wooden slats

Manufacturer - RENSON (Belgium)

LOGGIAWOOD combines the quality of aluminium with the natural feel of wood in one modern, efficient and aesthetic system. The aluminium panel frame ensures structural stability, while wooden slats elevate the design with a natural and elegant look.

• sliding shutter panels with fixed wooden slats
• efficient protection against sunlight with maximum light transmission and minimum obstruction of the view
• identical appearance from both inside and outside
• without visible fasteners
• frame material: extruded aluminium with easy maintenance varnished surface
• high-quality, no-maintenance hardware 
• suitable for use as sliding or fixed shutters
• size depends on local wind loads and regional regulations
• CE certified

Technical data

• aluminium components:
  • extruded aluminium, alloy EN AW-6063 T66
  • polyester powder coating in RAL or Syntha Pulvin tones [60-80 μ / 40 μ (UK)]
• slats:
  • slat type: fixed
  • material: WR Cedar Clear No. 2 or thermally treated wood 'thermo ash'
  • untreated, suitable for natural ageing
  • slat pitch: 90 mm
  • depth: 30 mm
  • angle: 33/57°
  • max. solar angle AS: 46/47“
  • perpendicular visual opening OV: 31/29%
  • max. free slat length: 1200 mm
  • longer slats require spacers
• frames:
  • material: aluminium
  • standard frame Loggiawood Paro 0140: frame depth 40 mm, suitable for standard panel sizes with max. height of 3000 mm and standard wind load
  • project frame Loggiawood Paro 0160: frame depth 60 mm, suitable for standard panel sizes with max. height of 3500 mm and standard wind load
  • depending on the height of the sliding panel, the horizontal frame profile (above and/or below) can be 70 mm high instead of 40 mm
• types of sliding systems:
  • simple, straight sliding system
  • symmetrical sliding system
  • synchronised sliding system
  • telescopic sliding system
  • with manual or motorised control
• possible to order as preassembled (manufactured per individual order) or as a modular construction for installation in a construction (standard lengths, tools and components)

Possible panel heights (H) depending on wind load (QB) and panel width (W):

* With a spacer:
As suggested by the professionals from the manufacturer's/representative's team regarding larger and more complex panels.
Standard wind load QB according to the technical standard ENV 1991-2-4(1995)