Closing system for double doors GEZE TS 5000 E-ISM with closing sequence control and electric hold-open device

Closer system for double doors GEZE TS 5000 E-ISM with built-in hold-open device

Manufacturer - GEZE (Germany)
 

• door closer for double doors with two closer profiles and a guide rail with a built-in door closing coordinator and a hold-open device for both door leaves
• door closing coordinator ensures correct closing order of door leaves – passive leaf first, then the active one
• suitable for double fire safety doors that must remain open:
  • the guide rail feeds 24V power from the fire detection and alarm system, and the door remains in an open position
  • in case of an emergency, the power supply is interrupted, and the door automatically closes in the correct order
  • it is recommended to install a local switch near the door to switch the power off manually and release the door from the hold-open position

Technical data

• built-in electric hold-open device for fixing the door in an open position
• adjustable hold-open force
• hold-open range: 80°-130°
• operating voltage: 24 V DC
• corresponds with fire safety door requirements with an emergency opening function for the passive leaf, according to EN 1125
• certified for use in fire and smoke safety doors if the closing force is set to 3 or higher
• closer profile is screwed on the leaf on the door pull side
• suitable for left and right hand doors opening inwards or outwards
• max. opening angle: 180°
• max. door leaf width: 1400 mm
• distance between hinges: 1300 - 2800 mm
• min. inactive door leaf width: 400 mm
• valve control of closing speed, latching action and soft close, adjusted from the front
• closing force adjustable from the front; sizes 2-6 according to EN 1154 A
  
  • size '2'- for leaf width up to 850 mm
  • size '3'- for leaf width up to 950 mm
  • size '4'- for leaf width up to 1100 mm
  • size '5'- for leaf width up to 1250 mm
  • size '6'- for leaf width up to 1400 mm
• visual closing force indicator
• valve for overload control
• temperature compensating valves
• profile size: 287 x 47 x 60 mm
• rail size: 2630 x 40 x 30 mm
• rail has anti-vandal protection with a flexible Bowden cable
• elongated holes ensure horizontal adjustment of 4 mm
• standard tones: silver, white RAL9016, black RAL9005
• any RAL tone and stainless steel tone are available on individual request

Auxiliary tools

• Mounting plate for door closer 287 x 60 x 5 mm
  Closer can be secured on the surface in more places other than the 3 screws on the closer's body.
  Requires 2 pc.!
  

silver tone code: SB00004574	black RAL9005 code: SB00004159

• Integrated opening restrictor
  Alternative to doorstops.
  code: SB00004445 (1 or 2 pc. as required)

• Guide rail controller
  Service component - for the replacement of a broken plastic controller
  code: SB00004525

Assembly instructions

GEZE TS 5000 E-ISM, E-ISM/G, E-ISM/S installation instruction