Profile cylinder for locking systems GERA 3000

Profile cylinder GERA 3000 

Manufacturer - ISEO

• suitable for creating locking systems
• complies with DIN 18 252 and DIN EN 1303 class P3 requirements
• anti-drill and anti-pull protection on the outside of the door, optionally on both sides
• 6 spring pins on each locking side
• protected key and cylinder profile; keys can only be duplicated with a security card
• anti-drill protection on one (ABS A) or both (ABS B) sides of the cylinder is provided by two rust-protected, hardened pins in the cylinder core and housing
• enhanced anti-drill protection on one (ABS C) or both (ABS D) sides of the cylinder is provided by two rust-proof solid metal pins in the cylinder core and body, as well as hardened steel first and second pairs of spring pins
• special tapered and pointed key tip with a suitable deeper profile section featuring 2 alignment pins
• combined key profile with variant options significantly increases the level of anti-pick protection and provides an exceptionally large number of locking combinations; with the combined key profile, alignment pins can also be inserted between the 4th and 5th pins
• separate general keys for each profile series, master keys and central keys for locking systems; registered individual locking profiles
• standard length = 60 mm (30-30 mm), extensions in 5 mm increments
• available cylinder types: profile double cylinders, half cylinders, shortened cylinders, and cylinders with a knob